Aztec Water Solutions

A replacement lamp for systems like the VIQUA S5Q-PA or VH150, which are designed to disinfect water at a flow rate of up to 5 gallons per minute.
28watts



Link in bio 🔗

Flow Rate 1 gallon per minute (GPM)
A compact ultraviolet (UV) water disinfection system designed for low-flow applications, such as single faucets, under-sink systems, or point-of-use filtration.

Purpose: Disinfects water using UV-C light to eliminate bacteria, viruses, and protozoa
Lamp Type UV-C lamp (typically 254 nm wavelength)
Power Standard plug-in unit (check for 110V or 220V compatibility)
Construction Stainless steel or durable polymer housing
Applications Residential drinking water, RVs, aquariums, lab use, or small commercial setups



Link in bio 🔗

Designed for ultraviolet water sterilizers, commonly used in reverse osmosis (RO) and well water systems. It emits UV-C light that kills or inactivates microorganisms like bacteria, viruses, and protozoa.
• Power: 6 Watts
• Length: ~8.5 inches
• Flow Rate Compatibility: Typically for systems up to 1 GPM (gallon per minute)

Features & Benefits
• Chemical-Free Disinfection: Uses UV light instead of chlorine or other chemicals.
• Effective Against: E. coli, coliform, Giardia, Salmonella, Cryptosporidium, and more.
• Environmentally Friendly: No harmful byproducts.
• Easy Replacement: Fits many standard UV sterilizer systems.



Link in bio 🔗

Responsible for compressing the pump tube to move fluid.
Different roller assemblies depending on the pump series and tube type!



Link in bio 🔗

Replacement pump tube used in Stenner peristaltic metering pumps. It’s made from Santoprene, a durable, chemical-resistant elastomer designed for consistent dosing performance.
Different use cases per design i.e #1, #2 and #7



Link in bio

Injects atmospheric air into irrigation water, delivering it directly to the root zone of crops. Uses an injector to create a vacuum that draws in air, then air is mixed with irrigation water and delivered through drip lines.

Applications;
Ideal for agriculture, especially in areas with poor soil aeration.
Used in chemigation, fertigation, and wastewater treatment.



Link in bio 🔗

The Reverse Osmosis Sediment Pre-Filter is used with Aztec's 4-Stage Reverse Osmosis Ultra-High Purity Filtration System.
• The Pre-Sediment Filter is recommended to be replaced, along with the Carbon Pre-Filter, once per year or as needed.
• We have replaced the rope one with this kind of sediment filter.



Link in bio 🔗

A filter cartridge, bag, or basket is held in a filter housing, which is a casing or container used to remove impurities from a fluid stream. It is an essential part of many filtering systems, making sure that contaminants are eliminated before the fluid leaves the housing.



Link in bio 🔗

Stainless steel chambers for durability and corrosion resistance
• Microprocessor-controlled power supplies with:
o Audible and visual lamp failure alarms
o Annual lamp replacement reminders
o Lamp life tracking
• Tool-free maintenance with easy lamp and sleeve replacement
• Optional solenoid shut-off valves and UV intensity monitors
• NSF/ANSI 55 Class A certified models available for high-assurance applications

Advantages
• No chemical by-products (unlike chlorine)
• No taste or odor alteration
• Low operating costs
• Third-party validated performance
• CAD-optimized chamber design for maximum UV exposure



Link in bio 🔗

One kind of membrane filtering system used to clean water by eliminating different impurities is a nano filter.



Link in bio 🔗