Auto ECU Programming

Auto ECU Programming

Share

Here is all about EOBDTOOL.co.uk news
Eobdtool.co.uk is a Best and professional car diagnostic tool

23/09/2026

📣📣2026 OBDSTAR C4-10 BDM JTAG Multi-ECU Adapter is here!🚗
https://www.eobdtool.co.uk/wholesale/obdstar-c4-10-adapter.html
⚡️Compatible with OBDSTAR X300 CLASSIC G3, DC706, and ECU MASTER, supporting a wide range of passenger car, motorcycle, and heavy-duty ECUs in both JTAG and BDM modes.
✅Extensive ECU coverage
✅JTAG & BDM support
✅More HD ECU support coming soon!
Upgrade your ECU programming capabilities with the OBDSTAR C4-10.

Photos from Auto ECU Programming's post 23/09/2026

🔥Unlock Module Complete Kit Update!😍
Please note: these 4 small accessories have been updated:
🔹1pc × C09GL015
🔹1pc × F09GL001
🔹1pc × F09GL002
🔹1pc × C33AD001
https://www.eobdtool.co.uk/wholesale/kess3-unlock-module.html
✨Please check the latest accessories when ordering!

22/09/2026

🤩🤩Launch X431 X-Prog5 Update Locked BMW MD1 MG1 ECUs on Bench✅
https://www.eobdtool.co.uk/wholesale/launch-x431-ecu-tcu-programmer.html
💁‍♂️This update enables locked BMW/VW Bosch MG1/MD1, RH850 chip reading (Bench/Boot mode), Fiat MB91 IMMO parsing, and Continental SIMOS18.x BOOT cloning, etc features for X431 X-Prog5, X431 ECU & TCU Programmer, and X431 X-Prog3 with PC Adapter.

22/09/2026

🥰🥰Alientech KESS V3 Read and Write 2016 BMW N20 ECU OK✅
https://www.eobdtool.co.uk/wholesale/kess3-ecu-tcu-programmer.html
💪A smooth and efficient solution for BMW N20 ECU tuning!

21/09/2026

🥰🥰Korhex for Flex- No Desoldering, No Manual Boot Wiring✅
A new hardware solution expands the potential of your Flex.
https://www.eobdtool.co.uk/wholesale/korhex-boot-glitch-mcu-tool-flex.html
💪Korhex gives you direct MCU access on supported ECUs, simplifying advanced Boot Glitch procedures and reducing the physical operations required on the control unit.

Photos from Auto ECU Programming's post 20/09/2026

🤩🤩Yanhua Mini ACDP/ ACDP2 now support bench-mode ISN reading as well as data reading and writing for locked post-June 2020 BMWgasoline and diesel ECUs (including B48, B58, B57, and more).✨💓
📛Yanhua B48/B58 Interface Board with A520 License is required.
https://www.eobdtool.co.uk/wholesale/yanhua-acdp-b48-b58-adapter-with-a520-license.html

Photos from Auto ECU Programming's post 18/09/2026

🥰🥰Autel IM508 read VW MQB49 5C key data OK with Godiag 5C clip adapter, no need soldering✅💥
https://www.eobdtool.co.uk/wholesale/godiag-bcp-u-key-bdc2-bdc3-14-in-1-adapter-kit.html
⚡️Connect with XP400 Pro, replaces APB113 adapter
https://www.eobdtool.co.uk/wholesale/autel-xp400-pro.html

18/09/2026

🤩🤩OBDSTAR ECU MASTER Read & Write Mercedes Benz CPC2.6.1 TC1797 TCU by Bench✅✨
https://www.eobdtool.co.uk/wholesale/obdstar-ecu-master-a.html

Photos from Auto ECU Programming's post 17/09/2026

💁💁2026 XirDecoder DTC - Chip Tuning - All Solutions Software Update🔥
https://www.eobdtool.co.uk/wholesale/xirdecoder-dtc-chip-tuning-software-standard-version.html

17/09/2026

🥰🥰Magic Motorsport Flex ECU Chip Tuning Tool Unboxing
https://www.eobdtool.co.uk/wholesale/flex-ecu-chip-tuning-tool.html
✅Flex offers ECU/TCU reading and writing, module repair, and performance improvement all in one single solution
✅This Flex is simply sold as hardware, to which you can add vehicle tuning protocols. Either master or slave, full or single protocols and activations
✅The Flexbox module offers BDM, Bootloader, JTAG and AUD tunings
✅Covering most cars, bikes, vans, and light commercial vehicles

Want your business to be the top-listed Autos & Automotive Service in Shenzhen?
Click here to claim your Sponsored Listing.

Telephone

Address

Room 303, Third Floor, Building A2 No. 9 Tang Keng Road, Liu Yue Community, Henggang Street, Longgang District, Shenzhen City, Guangdong
Shenzhen
518115

Alerts

Be the first to know and let us send you an email when Auto ECU Programming posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Subscribe

We will notify you when anything happens in Shenzhen.