Locklear's Pressure Washing

I would say we are great at what we do

If you’ve ever wondered whether a house wash really makes a difference, stay until the end and see the incredible before-and-after transformation! 💦🏡

“See a swingset = mandatory backflip 😎”

Very cool to clean some race cars for the big show .

“This sidewalk hadn’t been cleaned in years. Layers of dirt, algae, and stains built up over time, but with the right pressure and a professional surface cleaner, it’s like hitting the reset button on the concrete. There’s nothing better than watching years of grime disappear in seconds. If your sidewalks are looking like the ‘before,’ it might be time for a good wash.”

1. Pre-check
• Look for mold, algae, spider webs, oxidation, or rust stains.
• Note shaded areas — they’ll be the dirtiest.

2. Protect surroundings
• Thoroughly wet all plants and grass.
• Vinyl is forgiving, but SH isn’t.

3. Pre-rinse
• Low pressure rinse to remove loose dirt.
• Helps prevent streaking.

4. Mix your soft wash solution

Recommended mix for vinyl:
• 1.5%–2% sodium hypochlorite (SH)
• Add surfactant like soap so it clings

This strength is strong enough for green algae and black mold without harming vinyl.

5. Apply the solution
• Use a soft wash system, pump sprayer, or downstream injector.
• Apply bottom to top to prevent streaks.
• Fully coat panels, posts, and rails.

6. Dwell time
• Let it sit 5–8 minutes.
• Don’t let it dry.
• You’ll see algae melt off.

7. Rinse
• Rinse top to bottom using low pressure.
• Stand back 2–3 feet.
• No need to scrub unless there’s oxidation or rust stains.

8. Spot treatment (if needed)
• Rust stains → use a dedicated rust remover (no SH).
• Heavy oxidation → light brush with vinyl-safe cleaner.

9. Final rinse
• Rinse fence and re-wet plants.
• Walk the line and touch up missed spots.

Ice was frozen solid. The shovel wasn’t working so had to take out the 200 degree hot water. Enjoy the video