Total Racing Products

Joshua Telles R8 getting ready to go on the dyno with new intercoolers featuring our DIY 1000HP End Tank Set and Garrett - Advancing Motion cores.

FREE for previous and future TRP Ultimate Hardwire Kit customers who need fuel pump speed control.
If you are the original purchaser of one of our Ultimate Hardwire Kits and need to add fuel pump speed control to your setup, our new TRP Fuel Pump Speed Control Harness is completely free.
Order here: totalracingproducts.com/GTRPumpSpeed
Use coupon code SPEED at checkout and provide your original TRP order number in the order notes. If purchased through an authorized TRP dealer, provide the dealer invoice number and dealer name. You simply pay shipping.
Purchasing a new Ultimate Hardwire Kit? Select the Fuel Pump Speed Control Harness option when adding it to your cart and we will include it at no additional cost.
Hardwire Kit: totalracingproducts.com/HardwireKit
Our Ultimate Hardwire Kit was intentionally designed to bypass the factory FPCM and give the pumps full battery voltage. We still believe that is the better solution, especially with a properly designed aftermarket hanger.
However, customers using the restrictive factory hanger with larger pumps such as a DW430 or Walbro 450 can sometimes experience elevated base fuel pressure because the hanger cannot return fuel quickly enough. Some customers therefore prefer to retain the factory high, medium, and low pump speed control.
We created a proper way to do it.
The new harness plugs directly between the factory wiring and FPCM using custom manufactured mating connectors, then connects directly to the TRP Ultimate Hardwire Kit.
No cutting. No splicing. No Mickey Mouse wiring.
The entire harness is constructed from TXL wire, with 10 gauge feed and supply wiring and 16 gauge jumper wiring, giving the FPCM the best chance possible of surviving while controlling modern high current pumps.
Retaining the FPCM still isn’t our preferred strategy, but if your setup requires it, you no longer have to settle for the lower quality solution from “the other guys” just to retain pump speed control.

totalracingproducts.com/RSwitch | $279.99

NEW PRODUCT: R-SWITCH 2.0 IS HERE!

ONLY 18 LEFT AS OF THIS POSTING.

We expect another 30 units in approximately one week, followed by another 50 units in approximately three weeks.

Introducing the Total Racing Products R-Switch 2.0, designed from the ground up to fix two of the biggest annoyances with the factory R35 GTR R-Switch panel.

-RESTORE YOUR LEDs-

Failed, dim, or flickering LEDs are extremely common in factory R-Switch panels. R-Switch 2.0 replaces the original circuit board with our completely redesigned board featuring high quality LEDs and proper onboard voltage regulation.

-GAIN SWITCH MEMORY-

Set your transmission, suspension, and VDC switches exactly how you want them. When you start your GTR again, R-Switch 2.0 automatically restores your settings from your previous drive.

No more resetting your R-Switches every single time you start the car.

And this isn’t an adapter or external module.

R-Switch 2.0 completely replaces the factory circuit board inside your original R-Switch panel. No special adapter harnesses, external boxes, or additional modules are required.

This was one of the most complicated electronics projects we have undertaken at Total Racing Products. Fitting everything we wanted onto such a small PCB was an engineering challenge, but the result is something we are extremely proud of.

• Restores failed or dim factory LEDs
• High quality replacement LEDs
• Proper onboard voltage regulation
• Remembers your preferred R-Switch settings
• Automatically restores those settings at startup
• Direct replacement for the factory circuit board
• No external modules or adapter harnesses
• Black PCB with premium ENIG surface finish
• Designed and engineered by Total Racing Products

The first production run is almost gone.

18 remaining.

totalracingproducts.com/RSwitch
$279.99

Thank you to The Lab SSTX for their purchase of our R35 GTR 12 Injector Controller Kit!

With this kit, you can seamlessly add a 12-injector setup to your Ecutek GTR! No need to deal with inconsistent injector fire under load or danger to your stock ECU due to a faulty “listen and fire” style controller.

Ready to make some serious power? You’re gonna need 12 injectors. Check it out on our website to learn more:

https://totalracingproducts.com/product/total-racing-products-12-injector-controller-kit-for-ecutek-r35-gtr/

Total Racing Products is the home of total quality, total value, and total results.

Needing an oil change or transmission service on your Huracan/R8 V10? Perfect time to upgrade. We offer aluminum filter housing upgrades for both your engine and DL800 transmission.

Included with each housing kit is a custom socket to prevent marring or damage during installation. Check them out on our website to learn more!

https://totalracingproducts.com/product/total-racing-products-billet-aluminum-engine-oil-filter-housing-cap-huracan-r8/

https://totalracingproducts.com/product/total-racing-products-billet-aluminum-dl800-transmission-oil-filter-housing-huracan-r8/

Total Racing Products is the home of total quality, total value, and total results.

Our Ultimate MoTeC installation kit includes everything you need to make the jump to MoTeC engine management on your R35 GTR!

No guessing and no games - each harness is already cut to length and ready to install with sensors to match. Included is your flex fuel, pressure sensors, drivetrain harnesses, and MAP sensor/harness. All the vitals needed for your MoTeC ECU to do its job.

Switching to a MoTeC is a large and overwhelming job, let us make it easy for you!

Available now on our website at:
https://totalracingproducts.com/product/total-racing-products-ultimate-motec-installation-kit-r35-gtr/

Total Racing Products is the home of total quality, total value, and total results.

Big news for your PP! A new version of the Pierburg Pal is now available at totalracingproducts.com/PierburgPal

We’re not sure where the nickname “PP” originated from, but that’s how we and most customers refer to our popular pump controller.

The new version still uses a Deutsch-style 8-pin connector, so no need to worry about rewiring for existing installations.

What changed:
• Much smaller package, approximately 2” x 2.5”
• Beefier internal electronics
• Premium ENIG (Electroless Nickel Immersion Gold) PCB surface finish
• Fully epoxy-sealed enclosure for improved protection from the elements

The mode selection switch is also removed, we’ve found that most applications only require one control strategy and never change afterwards, so we simplified the controller and eliminated the chance of accidentally switching modes during installation.
Going forward, each V2 unit before it is potted. Choose PWM Speed Control Mode or Pressure Sensor Speed Control Mode at checkout, and it arrives ready to do its job.

For those that have a Pierburg Pal and are looking to make the switch to the new hardware, we haven’t forgotten about you. Send us your V1 and upgrade to a new V2 for just $99. Email us at [email protected] or send us a message for details.

Full TRP Competition Catch Can Kit for R35 GTR shipping out to Australia!

From street cars to full-blown racecars, this catch can kit is the ultimate breathing solution for the R35 GTR. This setup has been tested and proven time and time again on some of the fastest GTRs from numerous reputable performance shops.

Learn more on our website at: totalracingproducts.com/GTRCatchCan

Total Racing Products is the home of total quality, total value, and total results.

Fresh set of TRP 800 turbos prepped and ready for an 800 WHP build at The Shop Houston!

Get the most out of your stock engine and transmission safely and reliably today, starting at $3,899.99 with core exchange.

Check out our website to learn more:
https://totalracingproducts.com/product/total-racing-products-trp800-turbo-kit-r35-gtr/

Total Racing Products is the home of total quality, total value, and total results.

Our TRP V10 Keypad Kit for MoTeC is the perfect addition to any R8/Huracan build! We weren’t happy with any of the previous offerings due to interior placement, lack of features, and inferior quality, so we made our own!

This kit mounts using existing holes in both cars in non-invasive locations, giving you all the functionality of a keypad without having a big clunky light box in your face.

Check it out on our website at totalracingproducts.com/V10Keypad.

Total Racing Products is the home of total quality, total value, and total results.