Quick Fit Engine Service

Been doing a few of these builds, Ford Ranger, Mazda BT50 3.2 P5AT engines. These two are going in 6 wheel converted vehicles GVM 9000 kgs. Thats a massive load along with aftermarket ECU tune this puts massive strain on the engine. Along with the engine modifications we like to fit the Redarc 3 in 1 gauge. It measures metal temp, boost and exh gas temp.
With the engine mods, spur gear oil pump upgrade and taking notice of the gauge it should be impossible to hurt the engine.

We are on holidays to the 13 of May.

We will be closed 17/12/21 to 17/1/22.

To all our diggers past and present. Thankyou.

Ford 221 2v XP coupe. This customer was complaining about the drivability of his vehicle. When we pulled the engine down we found the cam was a 35 75 mechanical with hydraulic lifters fitted this would of made the cam even larger 40 80 or so. Very little compression. The engine was already at .040 pistons the bore looked ok but when measured up it had over .006 piston to bore clearance.
We fully reconditioned the engine using .060 pistons. Mild tweaked 25 65 cam. Bought the piston to zero to deck. Fiited harden ex valve seats etc etc. Will have it running mid next week and expect to have much better drivability and perform better. Enjoy working on these oldies. All work except camshaft done in house.

Been doing more European stuff. The latest is Audi A4 CDNC 2.0 turbo petrol. Full service history blown number 3 piston ring land out. Its only done 102 000 klms. Notice how they locate harmonic balancer on.

First day back at work from a three week holiday and Ash has this little beauty booked in for a performance engine. I love my job.

Been doing a few of these. Toyota Landruiser 1HZ 100 series fitted with a aftermarket turbo. We upgraded the piston and Conrods. These pistons are coated on the skirt and crown armour groove top ring. The pins are 2mm larger. The fuel pump was fitted with a boost compensator. Tuned to 14 psi. Also fitted a Redarc gauge that has three readings boost, egt and metal temp. This vehicle is from central Qld. We ran the engine in for the customer who is mega happy with the performance. Future upgrades top mount intercooler