T&L Performance

For anybody that rings the work phone please leave a voice message or text so I can get back to you as I don’t carry the phone on me constantly
Cheers

Sold the last 2 sets have a few more coming empire banshee pipes chrome with alloy mufflers billet end caps and chrome with black mufflers and billet end caps these sell fast send a pm to get a set

SOLD
2 available assasin stock bore cylinder kits
Pm us shipping available

NEW" ASSASSIN-2 CYLINDER KIT WITH A STEEL BORE SIZE OF 64MM (347cc)

THESE ARE OUR NEW DESIGN CYLINDERS..THE ASSASSIN-2'S. COMES WIHT A STEEL SLEEVE THAT STARTS OFF AT A 64MM BORE SIZE (347CC). THIS CYLINDER WILL UTILIZES ALL THE 513 SERIES WISECO PISTON SIZES (64MM THRU 66.5MM). WISECO 513M06400 PISTONS ARE INCLUDED IN THE KIT.

THE CYLINDER CAN EVENTUALLY BE BORED TO 68MM AFTER THE LAST STOCK BORE SIZE OF 66.5.

THIS KIT IS FOR PEOPLE THAT DO NOT WANT A NICKASIL BORE & WOULD RATHER JUST BORE THE CYLINDER TO THE NEXT SIZE RATHER THEN DEALING WITH THE NICKASIL REPLATING PROCESS. THIS IS THE SAME EXACT CYLINDER AS THE ASSASSIN-2 68MM 392CC KIT. WITH ALL THE NEW UPGRADES TO PORT DESIGNS.

WE SUPPLY WITH THE CYLINDER KIT A 21CC SMALL BORE DOME WHICH WILL REQUIRE THE USE OF PREMIUM PUMP GAS.

***THIS CYLINDER KIT MUST BE USED WITH A STOCK STROKE (110MM ROD) CRANKSHAFT.***

WE HAVE SET THE PORT TIMING FOR THESE CYLINDERS IN A MODERATE SETTING FOR ANY TYPE OF RIDING OR RACING:

EXHAUST PORT TIMING IS: 192 DURATION

TRANSFER TIMING IS: 120 DURATION



THE NEW CHANGES TO THE CYLINDERS ARE:

1) INTAKE TUNNEL ROOF HAS A SMOOTHER TRANSITION.

2) BOOST PORTS WERE ADDED TO THE INTAKE.

3) THE OUTSIDE CYLINDER AREAS AROUND THE BOOST PORTS WERE FILLED IN SO BOOST PORTS CAN BE MADE LARGER WITHOUT BREAKING THROUGH. THIS EXTRA MATERIAL HAS CAUSED THE USE OF AN ARP NUT ON THE REAR OUTSIDE INTAKE STUD.

4)TRANSFER TUNNELS WERE MADE LARGER AND NOW REQUIRE THE USE OF A CUB BASE GASKET. THE INTERNAL BORE SIDE WALL IS ROUNDED FOR BETTER FLOW.

4A)THE TRANSFER DIVIDER RIB IS SHORTER AND LOWER TO ALLOW FUEL FROM THE BOOST PORTS TO REACH THE FRONT TRANSFER WINDOW EASIER.

5) THE OUTSIDE OF THE CYLINDER AROUND THE TRANSFER PORTS WERE EXTENDED TO GIVE MORE SEALING AREA AND MORE ROOM IF ADDITIONAL PORTING IS DESIRED.

6) THE FRONT TRANSFER WINDOW IS ANGLED FOR BETTER FLOW.

7) THE EXHAUST PORT SHAPE HAS CHANGED FOR MORE AREA AND FLOW.

😎 THE TRIPLE PORTS ARE LARGER AND THE TRIPLE TUNNEL WAS INCREASED IN SIZE TO MATCH.

Wanted 2 banshee clutch baskets with the gears on the basket condition doesn’t matter aslong as the rest is good message us

We have 6 sets of stock stroke 21cc domes
2 sets of 22cc domes stock stroke
Available send a message

We have in stock from today
Banshee
521 kits
443 kits
392 kits SOLD
Standard bore kits
Driveline performance
Trail/dune clutch kits
Pwk 33mm carbs SOLD
10mill cranks
7 mill cranks
4 mill cranks
Standard stroke cranks
All cranks have been trued/welded all have koyo bearings
Send us a message

Banshee empire pipes
We have 2 sets here available ready to go
Supply supply fit and jet to suit
Send thru a
Message

For sale read the message on last picture

been sitting stored for a few years just been serviced carbs stripped cleaned and dynoed being delivered back to the customer

Banshee elka shocks +pack with shock gaurds set of 3 shocks long travel so you need long travel a arms wich we also stock have 2 sets for different weight riders
Send a message for info these are stocked no wait times ready to go