Matech Solutions

Matech Solutions

Delen

Onderhoud en tuning van straat-, circuit- en racemotoren
and Technical and Material Science Solutions for Automotive and other Technical Projects

Photos from Matech Solutions's post 09/09/2024

Nice to see the aero elements from the factory Ducati at two stages in a turn. And check out hom thin their mid-section of the chassis is to allow for sideway flex.

Photos from Matech Solutions's post 18/08/2024

Doodeman disks. Available in 4.0, 4.5 and 5.0mm to suit the braking intensity of the circuit

Photos from Matech Solutions's post 30/11/2023

After upsweeping lower end of fairings, double spoons, and swingarm mounted side deflectors, is KTM taking the concept of creating downforce to the next level by adding a full “scoop”?
It looks they are trying to get downforce from the rear wheel area by tucking in the rear end of the lower fairing and creating a “ring shaped” air guidance to funnel the air between the swingarm and the tire and pushing it upwards. Is this the motorcycle equivalent of a diffuser?

Photos from Matech Solutions's post 14/11/2023

Love to see how far KTM goes with their new bikes. Optimising the wall thickness of the top and bottom triple clamps to make a consistent pressure on the fork tubes. How clever! (Foto credit Transmoto)

Photos from Matech Solutions's post 15/09/2023

Ducati Moto-GP bike. Comments in pictures

Photos from Matech Solutions's post 19/08/2023

Who can help me to identity what bike this output shaft is from? Seems in good shape, but have no clue any more where it came from.

Photos from Speed Mediums's post 19/05/2022

J-dampers and adjustable anti-roll for Formula Student car. J-dampers is an area still not used for racing bikes enough, in my humble opinion. The spring “sees” position of suspension, the damper “sees” speed of movement (first order of position). The J-damper or inertia damper (flywheel) “sees” changes of speed of suspensions (second order of position). Not to be confused with tuned mass damper.

https://www.facebook.com/827496934253620/posts/1707352112934760/?d=n

Photos from Matech Solutions's post 08/02/2022

Bike manufacturer "Propain" linkage system. Would be nice for a Motorbike. Compact, brace connects high to the frame, so forces are led into the frame high-up, allowing low lateral stiffness, constant anti-squat over the travel, nice wheel path. when does Ducati build a moving pivot point construction? Surely with the shapeshifter the travel range of the rear wheel becomes larger and a good anti-squat control becomes more and more important.

15/01/2022

Older Ducati Moto-GP variable length intake trumpets. NOT two-stage intake trumpets like streetbikes. I am surprised this technology never made to to streetbikes.

Photo credit Iconic Bikes

Wilt u dat uw bedrijf hét hoogst genoteerde Autobedrijf in Helmond wordt?
Klik hier om uitgelicht te worden.

Type

Website

Adres


Prins Hendriklaan 24
Helmond
5707CJ