Stealth Ride
Our hobbies are the same as yours! Lets be friends!
29/09/2026
Guess who is doing some Turbo Testing soonβ¦ π
Thanks to Custom Works for putting together a new SR20 for us π
Canβt wait to work out what the best bolt on SR20 Turbo from our friends at Aeroflow Performance really is π€·ββοΈ
28/09/2026
Both will get fuel into your engine, but they do it in very different ways.
EFI β ELECTRONIC FUEL INJECTION
EFI uses injectors controlled by an ECU to precisely control how much fuel the engine receives.
β
More precise fuel delivery
β
Easier cold starts
β
Better drivability across changing temperatures and conditions
β
Easier to tune for boost, ethanol fuels and higher horsepower applications
β
Can compensate for changes in load, RPM and engine conditions
The trade-off? EFI systems generally require higher fuel pressure, more wiring, sensors and electronics.
A typical EFI setup may include:
β’ High-pressure fuel pump
β’ EFI fuel pressure regulator
β’ Fuel rail + injectors
β’ ECU
β’ Proper pre & post-pump filtration
β’ Return line depending on the system
CARBURETTOR
Carburettors use airflow and pressure differences to mechanically meter fuel into the engine.
β
Simple
β
Easy to understand and work on
β
Minimal electronics required
β
Great for classic cars, hot rods and traditional V8 builds
β
Can support serious power when properly set up
Carb systems normally operate at much lower fuel pressure than EFI, so choosing the correct pump and regulator is extremely important.
A typical carb setup may include:
β’ Low-pressure fuel pump
β’ Carb-compatible fuel pressure regulator
β’ Fuel filter
β’ Carburettor
β’ Fuel lines and fittings
A FEW OPTIONS FROM STEALTH RIDE
EFI:
Aeroflow AF49-1015 β 300LPH EFI pump, rated to support up to 675HP
Aeroflow AF66-2060 β 35β85 PSI EFI fuel pressure regulator
CARB:
Aeroflow AF49-1067 β Low-pressure 25 GPH / 4 PSI carburettor fuel pump
Aeroflow AF49-4500 β 4.5β9 PSI bypass fuel pressure regulator
π SHOP THE FULL AEROFLOW FUEL SYSTEM RANGE:
https://stealthride.co.nz/collections/aeroflow-fuel-system
27/09/2026
If youβre looking for a brake upgrade, look no further than Stealth Ride.
Seen here on the Josh Merritt Evo:
β’ Wilwood 6-piston calipers
β’ DBA T3 rotors
β’ Winmax W5 brake pads
β’ HEL Performance braided brake lines
Whether youβre building a street car, track car or something in between, we can help put together the right brake package for your setup.
Ready to upgrade your brakes? Get in touch with the team or shop online today!
https://stealthride.co.nz/collections/brake
Hayden Paddon, and the full Winmax range, now at Stealth Ride. π’
Paddon Rallysport is the sole Winmax distributor in New Zealand, and Hayden has been working with the Winmax factory on compound development since 2013. The full range is now on our shelves.
53 fitments, every one of them in stock:
πΉ Honda - EF, EG, EK and EK9 Civic, EP3, FK8 and FL5 Type R, DC2 and DC5 Integra, S2000, NSX, Accord and Torneo Euro R
πΉ Nissan - S13, S14, S15, R32, R33, R34, R35, 350Z and 370Z
πΉ Toyota - GT86, GR Corolla, GR Yaris, Supra Mk4, MR2, MRS, Altezza and Chaser
πΉ Mazda - FC and FD RX7, RX8, Atenza/6 MPS and Axela/3 MPS
πΉ Mitsubishi - Evo 1-3, 4, 5-6, 7-9 and 10
πΉ VW - Mk5 Golf GTI and R32, Mk6 and Mk7 Golf GTI and R
πΉ BMW - E36, E46 and E90
πΉ Ford Mk3 Focus RS, plus Wilwood Dynalite and Dynapro
Street, club, rally or circuit.
π stealthride.co.nz/collections/winmax
CONSTANT TENSION vs T-BOLT CLAMPS
Whatβs the difference?
T-BOLT
Strong, simple and reliable. Great for intercooler piping and silicone joiners.
CONSTANT TENSION
Spring-loaded to maintain clamping force as things heat up, cool down and move.
Both do the job β constant tension is the step up for high-heat, high-boost setups.
Available at Stealth Ride!
https://stealthride.co.nz/collections/hose-fittings-hose-clamps
Stocked up big time, so your order goes out sooner. π¦
Pallet after pallet has landed at Stealth Ride. Fittings, hose ends, braided line, catch cans and battery boxes, sitting on the shelf here in New Zealand instead of on a boat.
πΉ Deeper stock right across the Aeroflow range
πΉ More lines held locally, which means fewer back-orders
πΉ Ordered today, out the door faster
π stealthride.co.nz
26/09/2026
Aeroflow Performance Engine Mounts for Mitsubishi Evoβs!
A solid upgrade for worn factory mounts or higher-powered 4G63 builds.
Black polyurethane bushes help reduce excessive engine movement while keeping the engine firmly located under load.
Direct bolt-up design with high-quality steel construction.
Available for EVO 4-9 applications, including engine and transmission mount options.
Available now from Stealth Ride!
https://stealthride.co.nz/collections/aeroflow-chassis-suspension-steering-chassis
Keep it cool. Aeroflow thermo fans, 7 inch right through to 16 inch. π
Part of the biggest restock Stealth Ride has done, and the whole fan range is here in New Zealand.
πΉ Thermo fans - 7in AF49-1017, 10in AF49-1000, 12in AF49-1001, 14in AF49-1002, 16in AF49-1003
πΉ Chrome thermo fans - 14in AF49-1027 and 16in AF49-1028
πΉ Brushless fans - 10in, 12in, 14in and 16in, pusher and puller
πΉ Fan relays, thermostat relay and dual fan wiring harness kits
πΉ Adjustable fan controller, mounting feet and quick fit mounting kits
Chasing more cooling for a track day, or replacing a tired factory fan before summer. Either way it is in stock and it ships fast.
π stealthride.co.nz/collections/aeroflow-electrical-electric-fans
25/09/2026
Auto Meter Antique Beige. 10% off, and the sale ends Monday. π₯
Cream faces, chrome bezels and classic pointers. The one that sits right in a resto or a period build, where a modern gauge would look wrong.
πΉ Tachometers - AU1890, AU1897, AU1898 and AU1899
πΉ Speedometers in km/h and mph - AU1887-M and AU1889
πΉ Oil pressure, water temperature, fuel level and Voltmeter
πΉ A matching Clock, AU1885
πΉ Quad Gauge AU1812, Quad Gauge/Speedometer Kit AU1803 and the 5 Gauge Kit AU1809-M
The full range is 10% off until Monday 28 September. If you are doing the whole cluster, this is the week to do it.
π stealthride.co.nz/collections/antique-beige-autometer
25/09/2026
Another very cool order heading out the door!
This customer has gone with 2x AutoMeter Designer Black AU1403 2-piece gauge kitsβ a great option for keeping a classic-style dash while bringing all the important information together.
The kit features two 5β gauges:
* 0β120 MPH electronic speedometer
* Fuel level
* Oil pressure 0β100 PSI
* Water temperature 100β250Β°F
* Volts 8β18V
* 240Ξ© empty / 33Ξ© full fuel sender range
* Chrome bezels with black faces and orange needles
* Electric air-core gauges
* Includes oil pressure, water temperature, fuel level and speed senders plus installation hardware
A seriously tidy setup for a hot rod, classic or custom build.
Shop AutoMeter for 10% off now!
https://stealthride.co.nz/collections/auto-meter
Click here to claim your Sponsored Listing.
Category
Contact the business
Website
Address
Wellington
5011