AB Razzaq Info

💧 Water Treatment Expert Challenge

RO plant ki feed water TDS normal hai, SDI bhi < 3 hai, lekin RO permeate ki conductivity suddenly increase ho jati hai.

Sab se pehle kis parameter ko investigate karna chahiye?

A) Feed pressure
B) RO membrane salt rejection
C) Antiscalant dose
D) Feed water temperature

👉 Correct answer comment mein batayein — aur reason bhi explain karein!

💧 RO Expert Challenge! 💧

What is the ideal SDI (Silt Density Index) value for RO feed water?

🅰️ < 3
🅱️ < 5
🅲️ < 8
🅳️ < 10

👇 Drop your answer in the comments and explain why you chose it.

High Pressure Boiler mein silica limit se zyada ho jaye, to sab se pehle kis equipment ko nuksan pahunch sakta hai?

A) Steam Turbine
B) Condensate Pump
C) Cooling Tower
D) Feed Water Tank

💬 Apna answer comments mein share karein.

Which water quality parameter is the best early warning that an RO membrane needs cleaning?

🔹 A) Product Water TDS
🔹 B) Differential Pressure (ΔP)
🔹 C) Feed Water Temperature
🔹 D) Product Water pH

💬 Comment your answer (A, B, C, or D)

Agar RO membrane ki Differential Pressure (ΔP) achanak increase ho jaye, to sab se pehla shak kis cheez par karna chahiye?

A) Membrane Scaling
B) Membrane Fouling
C) Feed Pump Failure
D) Low Feed TDS

RO Challenge | Experts Only!

Which parameter is the first to indicate membrane scaling?

🅰️ Salt Rejection
🅱️ Differential Pressure
🅲 Feed Flow
🅳 Product pH

👇 Comment your answer. Let's see who really understands RO membrane performance!

RO membrane fouling ka sab se common reason kya hota hai?

A) High Feed Pressure
B) Poor Pretreatment
C) Low Flow Rate
D) High Product Flow

Which parameter is the most important before starting an RO Plant?
🅰️ pH
🅱️ SDI
🅲️ TDS
🅳️ Conductivity

💬 Comment your answer below!
🏆 Let's see who gets it right first.

In RO Plant, what is the primary purpose of dosing SMBS before the RO membranes?
A) Increase Feed Water pH
B) Remove Residual Chlorine
C) Increase TDS
D) Prevent Silica Formation