Dingo Power

Toro Dingo TX1000 – General Inspection

A good inspection can catch small problems before they turn into expensive repairs or downtime.

In this video, we walk through a general inspection of a Toro Dingo TX1000 and cover:

Tracks, bogie wheels, and undercarriage
Hydraulic hoses, fittings, and leaks
Fluid levels and overall fluid condition
Pins, bushings, and grease points
Engine and cooling system
Controls, switches, and safety components
Common wear areas we see in the shop

Whether you're maintaining your own TX1000 or looking at a used machine before buying it, knowing where to look can tell you a lot about its overall condition.

Watch the video and see how we inspect a TX1000 from front to back.

oro Dingo TX1000 – Radiator Hose Replacement

A leaking or deteriorated radiator hose can quickly turn into an overheated engine and a much bigger repair.

In this video, we cover:

Signs your TX1000 radiator hoses need replacement
Removing the old hose
Inspecting fittings and connections
Installing the replacement hose
Refilling and checking the cooling system for leaks

Radiator hoses live in a tough environment with constant heat, vibration, and pressure. A quick inspection during routine maintenance can catch a failing hose before it leaves your machine down on the job.

Watch the video and see how we replace a radiator hose on a Toro Dingo TX1000.

Toro Dingo TX1000 – Foot Switch Upgrade

If you've dealt with foot switch problems on a TX1000, this is an upgrade worth knowing about.

In this video, we cover:

Common problems with the original TX1000 foot switch
Why the switch can become unreliable over time
The upgraded foot switch setup
Installation and adjustment
What to check if your machine is having intermittent switch issues

A small switch can cause some frustrating problems when it starts acting up. Upgrading the foot switch can improve reliability and help eliminate one more potential failure point.

Watch the video and see how we upgrade the foot switch on a Toro Dingo TX1000.

Toro Dingo TX1000 – Wheel Motor Inspection

Think you might have a wheel motor going bad? Before replacing an expensive hydraulic component, take the time to properly inspect it.

In this video, we cover:

Common signs of TX1000 wheel motor problems
Checking for leaks and external damage
What excessive play can tell you
Signs of internal wear or failure
What else to inspect before condemning the motor

A failing wheel motor can cause weak drive performance, pulling to one side, unusual noises, or hydraulic issues. Catching the problem early can help prevent additional damage.

Watch the video and learn what to look for when inspecting a TX1000 wheel motor.

It’s Fire Friday.

Sometimes the TX1300 attachment plate comes right off. Sometimes it needs a little convincing.

Today, that convincing involves FIRE.

TX1300 attachment plate removal the Rusty Rental way.

Toro Dingo TX1000 – What Coolant Should You Use?

Not all coolant is the same, and using the correct type in your TX1000 matters.

In this video, we cover:

The proper coolant type for the TX1000
Why coolant type and compatibility matter
What to avoid mixing together
Checking coolant level and condition
When it's time to flush and replace your coolant

The wrong coolant—or mixing incompatible coolants—can create cooling system problems and potentially lead to expensive repairs.

Watch the video before topping off your TX1000 and make sure you're putting the right coolant in your machine.

Toro Dingo TX1000 – Hydraulic Fluid Check

Checking your hydraulic fluid is one of the simplest maintenance items on a TX1000, but doing it correctly matters.

In this video, we cover:

Where to check the hydraulic fluid
How to get an accurate fluid level reading
What to look for when inspecting the fluid
Signs of contamination or hydraulic problems
Why maintaining the proper fluid level is critical

Low or contaminated hydraulic fluid can lead to poor performance, excessive heat, and expensive component damage. A quick inspection can catch problems before they turn into major repairs.

Watch the video and make hydraulic fluid checks part of your regular TX1000 maintenance routine.

Toro Dingo TX1000 – Block Heater

Cold weather is hard on diesel engines, especially when your machine has to start first thing in the morning. A block heater can make all the difference.

In this video, we cover everything you need to know about the TX1000 block heater, including:

How the block heater works
Benefits of preheating the engine
Installation tips
When and how long to plug it in
Why it reduces engine wear during cold starts

A warm engine starts easier, smokes less, and gets to operating temperature faster—all while reducing stress on the battery and starter.

Watch the video and see why a block heater is one of the best upgrades for anyone running a TX1000 in colder climates.

Toro Dingo TX1000 – Tandem Pump Teardown & Inspection

When hydraulic performance starts dropping, the real story is often hiding inside the tandem pump.

In this video, we tear down a TX1000 tandem pump and inspect every major component, covering:

Proper pump disassembly procedures
Common wear points and failure areas
Inspecting the rotating group and valve plates
Signs of contamination, scoring, and heat damage
How to determine whether a pump can be rebuilt or should be replaced

A careful inspection can tell you exactly what caused the failure and help prevent the same problem from happening again.

Watch the teardown, see what a worn pump looks like on the inside, and learn what to look for before spending money on replacement parts.

Toro Dingo TX1000 – Starter Replacement

Click... click... nothing. If your TX1000 is having trouble starting, a worn starter could be the problem.

In this video, we walk through a complete TX1000 starter replacement and cover:

Common symptoms of a failing starter
How to verify the starter is actually the problem
Safe starter removal and installation
Electrical connections to inspect while you're there
Tips for preventing future starting issues

Before replacing expensive electrical components, it's important to diagnose the problem correctly. A few simple tests can save you both time and money.

Watch the video and learn how to replace the starter on your TX1000 the right way.