Automate America

👉 Apply: https://automateamerica.com/app/automation_work/index/4132
Click this link to apply.

Everybody staffs the build. Almost nobody staffs the six weeks after it, when the line has to make good parts on a Tuesday with the regular crew running it.

This contract staffs both. Final debug and commissioning first, then production start-up support on the same equipment, in Woodhaven, Michigan. Siemens TIA Portal and WinCC are the mandatory part; FANUC Handling Tool and Keyence VS vision are good to have. $68 an hour straight time, $88.40 overtime.

Apply at the top 👆

Which is harder to staff: the build or the ramp? Say which, and why.



🔷🔶

👉 Apply: https://automateamerica.com/app/automation_work/index/4129
Click this link to apply.

Stop one: Wixom, Michigan. New automated equipment gets debugged and commissioned, and you are on it from September 28 for three to four weeks.

Stop two: Toledo, Ohio. The crew follows the project there and stays through the end of the year.

FANUC robots, iRVision 3D, GM GRS standards certification. $64 straight time, $80 overtime, about 10 hours a day, 6 days a week, day shift.

Apply at the top 👆

Is following a project from the build to the plant the best stretch of commissioning, or the toughest? Pick one.

IF YOU BUILD THE MACHINE, WIRE IT AND HELP DEBUG IT, COKATO NEEDS TWO OF YOU.

If you build fixtures from prints and know how to make cylinders, clamps and locating nests come together correctly, HOLLAND NEEDS TWO OF YOU.

That is four machine tool builder openings in two locations—all starting September 14.

📍 COKATO, MINNESOTA
Two mechanical/electrical machine builders
$48/hr | $62/hr OT | $76/hr Sundays and holidays
$225/day per diem with no receipts required
Approximately two months, with potential to continue

👉 Apply:
https://automateamerica.com/app/automation_work/index/4094

📍 HOLLAND, MICHIGAN
Two machine tool builders
$64/hr | $83.20/hr OT | $102.40/hr Sundays and holidays
September 14 through October 31, likely to extend

👉 Apply:
https://automateamerica.com/app/automation_work/index/4090

It is alright to want work that pays you for what you actually know how to do.

And for the customers watching: your next builder, electrician, programmer or entire project team may already be on Automate America. Post your jobs, contracts and RFQs for free, set the rate you want to pay and receive applications directly from trusted professionals with ratings, reviews and completed-contract histories.

👉 Post your own work free:
https://automateamerica.com/app/automation_work_new/add

👉 Apply: https://automateamerica.com/app/automation_work/index/4094
Click this link to apply.

Cokato, Minnesota has fewer than three thousand people in it, and there is large automated manufacturing equipment going up inside it this month. That is American manufacturing in one sentence: the machines that make things get built in towns nobody flies to.

Two builders needed, mechanical and electrical. $48 straight time, $62 overtime, $76 Sunday and holiday, plus $225 a day. Starts September 14.

Apply at the top 👆

Everyone in this trade says the best work happens in the small shops. Name the town you did your best build in.

👉 Apply: https://automateamerica.com/app/automation_work/index/4090
Click this link to apply.

Assembly prints. Pneumatic cylinders. Toggle clamps. Locating nests. Plug-and-play cable and hose.

That is the whole list. No controls scope, no programming, no commissioning sign-off. If you read
that and thought "that is just my week," you are not underqualified for this — you are exactly it.

Holland, Michigan. Two builders. $64/hr, $83.20 on overtime, $102.40 Sundays and holidays.
September 14 through October 31, likely to extend.

It is alright to want work that asks for what you already do. Link is at the top 👆

👉 Apply: https://automateamerica.com/app/automation_work/index/4069
Click this link to apply

Maple Systems HMI and PLC combo unit. Bowl feeders. Torque drivers. Program created from scratch.

That is a narrow stack, and if you read it and thought "that is basically my week," this contract
was written for you. Example programs are on site for reference, so you are translating a solved
machine rather than starting at a blank screen.

Hendersonville, Tennessee. $140 an hour, ten to twelve hour days, on site today and through the
weekend until the system runs.

Does a narrow stack make you more employable or less? Narrower pays better, every time.

Apply button is at the top 👆

👉 Apply: https://automateamerica.com/app/automation_work/index/3993

September 3rd.

Count backwards from it. A copper tube bending machine in Stuarts Draft, Virginia comes down, and one controls engineer needs to already be standing in front of it — program development, debugging, hardware configuration, Allen-Bradley CompactLogix and Bosch servo drives.

Not interviewing on the 3rd. Working on the 3rd.

$120/hr, $140 overtime, $60/hr travel time, and the flight, hotel, car and per diem are all covered. About two weeks on site.

There is no version of this where a hiring process runs first. That is exactly why it is posted
somewhere you can apply in a minute. Apply button is at the top 👆