47point9

🤔 About to do some measurements and model adjustments to fit a transponder. Finally going to try to work out the details for a modular key system... if all is well then I should be able to prototype a few keys in the near future.
♥️ What key do you want to see me make next? Drop me a DM and I may give you the first prototype to test.

⚡ I'm thinking about adding the edge knurling as an option on my Honda nax keys - thoughts? This was my first try at reproducing the look and feel. I have since created a 3d depth map and tested different settings and engraving depths, with a few promising results.
✅ Im going to do another test or two. I initially was going to machine this area into the key but I thought the process of cleaning up the surface would muddy the fine details.

1️⃣ One of my "Oldschool" Nismo lighter handles going out in a purple anodization. I've been thinking about making some custom toggle switches for one of my projects I'm working on using this kill switch design as the base... either this or a canbus switch panel, but I think titanium switches sounds a lot cooler 🫪
These mount over your existing cigarette lighter or you can purchase with the optional "lighter blank" for a flush mount against the hole your lighter presses into. I've redesigned the lighter blanks to be a tight fit, but a dab of adhesive keeps them perfect.

🤔 One of my Honda keys with an S2000 engraving... v***r blasted and anodized blue. CNC machined from solid billet titanium. The "v***r blasted finish" is a satin/matte surface that is done with a fine media in a wet sand blasting cabinet. The slurry of media and water blasts the surface of the metal, providing a nice premium finish that closely resembles the original NSX key finish.
✅ What do you want to see me make next? I've been sitting on a few key designs and hope to get the prototypes knocked out in the near future.

🦄 One of my Stagea keychains with lanyard set up as a mirror hang in a sick Stagea I saw out in the wild at Cars and Coffee. Get yours on my website at 47point9.com 😎
✂️ Cut 3mm thick to last a lifetime! Hand finished and hand anodized.

⬛ A deep, black "S15 S" engraving on one of my "R34" titanium keys. I played around with a handful of odd settings to burn a black color into the back of the engraving. It's a pain and likely not something I will offer normally, but it does look pretty good 😎
New stuff going up on the website this week. Stay tuned for some updates.

🫪 It's absolutely sick to conceptualize something and then model it out because of the access to modern technology. I designed a custom upper half to my factory air box to connect to my odd turbo setup using a 3D printed TPU coupler. Pictured is the test fit - black TPU is inbound for the final print.
✅ I designed and 3D printed the turbo inlet adapter with a TPU seal, the mating coupler, and upper half of the air box. It holds an R35 MAF to allow me to make 400+ on my Rb25det swapped R32 Skyline using Nistune. There are a few very minor issues with fitment, but not worth reprinting to correct them. The lessons learned and honing of a skill set is really what I was going for with this project.