Mr Apple Fu

One leg on this small parts washer had cracked near the bottom and made the whole unit wobble. I fitted a new steel section and welded the leg back square so the washer sat level again.

The tow hitch on this compact lawn roller had bent after being pulled over rough ground. I cut away the damaged section, fabricated a fresh hitch plate and welded it back in line with the frame.

The handle mount on this small power trowel had started splitting from constant vibration. I removed the damaged bracket, made a new one and welded it back into position so the controls stayed steady.

One corner of this portable welding screen had broken after being moved around the shop for years. I replaced the damaged tubing and welded the frame back straight so the screen stood firmly again.

The side frame on this small seed drill had cracked near one of the wheel supports. I removed the weak section, fitted fresh steel and welded it back square so the machine tracked properly again.

The bottle support on this welding cart had bent after years of being pushed around the shop. I made a new steel bracket and welded it into place so the cylinder could sit securely again.

The handle on this small cement mixer had cracked where it joined the frame. I cut away the damaged joint, fitted a fresh piece of steel and welded the handle back firmly.

The axle mount on this pressure washer had started pulling away from the frame. I removed the weak section, made a fresh mount and welded it in before reinstalling the wheel.

One corner of this generator frame had bent and cracked after being dropped during transport. I straightened the frame, replaced the damaged section and welded it back into shape.

The mower deck had split near one of the wheel mounts after years of vibration. I cleaned the damaged area, fitted a small steel section and welded it back solid so the wheel could sit straight again.