Unique Systems

Are you working harder than your st****er has to?
One of the biggest mistakes in floor stripping is not allowing enough dwell time.
Why it matters:
- It helps soften and break down old finish
- It can reduce repeated scrubbing and extra passes
- It helps floors strip more evenly
- It gives the chemistry time to do its job
Pro Tip: Keep the floor wet during dwell time and always follow label directions.
Product highlight: NCL Bare Bones
A dependable st****er designed to help remove old finish more efficiently.
Questions about floor finish removal or choosing the right stripping products?
Call Unique Systems at 803-359-4180.

Want a brighter, cleaner-looking floor without a full restoration?
Burnishing can help bring finish back to life by improving gloss and sharpening the overall appearance of the floor.
A few keys to better burnishing results:
- Use the right pad and equipment
- Make sure the floor is clean before burnishing
- Use the right cleaner/enhancer to support the process
- Stay consistent with routine maintenance
Product highlight: Pioneer Eclipse ReBound
ReBound is designed to clean and enhance, helping support a better-looking floor maintenance program.
If you have questions about burnishing programs, pads, or floor-care products, give Unique Systems a call at 803-359-4180.

What does a concrete stain protector actually do?
A stain protector helps keep spills from soaking into concrete as easily, which can make the surface easier to maintain and help preserve the look of polished or decorative concrete.
It can also help protect color and improve resistance to everyday wear and chemical exposure.
The key is matching the protector to how the floor is used, the appearance you want, and the maintenance program you plan to follow.
Ameripolish 3D SP E is a ready-to-use stain protector designed for polished and decorative concrete, with added abrasion and chemical resistance.
Questions about protecting polished concrete? Give us a call at 803-359-4180.

Why can a floor still look dirty even after cleaning?
Sometimes the problem isn’t that the floor wasn’t cleaned — it’s how it was cleaned.
Dirty mop water or recovery solution can redeposit soil, the wrong cleaner or dilution can leave residue behind, and worn floor finish can sometimes make a clean floor still look dull.
A few simple things make a big difference:
- Use fresh cleaning solution
- Mix chemicals at the proper dilution
- Match the cleaner to the floor
- Know when the issue is worn finish instead of soil
Pioneer Eclipse Neutral Cleaner is a dependable daily cleaner for routine floor maintenance and is designed to clean without leaving unnecessary residue behind.
Questions about your floor-care routine? Give us a call at 803-359-4180.

Why does carpet seem to get dirty again so quickly after cleaning?
A few common reasons are detergent residue, too much moisture, and dry soil that wasn’t fully removed before cleaning.
Residue can attract new soil, over-wetting can cause spots to wick back up as the carpet dries, and poor vacuuming leaves abrasive dirt behind in the fibers.
That’s why good carpet care starts with the right chemistry, proper dilution, and thorough vacuuming.
NCL All-In-One is an encapsulating carpet cleaner designed to help suspend soil and dry to a non-sticky residue that can be removed during routine vacuuming.
Questions about carpet care? Give us a call at 803-359-4180.

Stain resistor or topical sealer — what’s the difference?
They’re not the same thing.
A stain resistor penetrates into the concrete and helps protect against staining while keeping more of the natural polished look.
A topical sealer sits on the surface and adds a film or coating, which changes how the floor looks, wears and is maintained.
The right choice depends on the floor, the traffic it sees, and the appearance you want to maintain.
Ameripolish SR2 is one option we use for polished concrete when stain resistance is the goal without adding a heavy topical coating.
Questions about polished concrete protection? Give us a call at 803-359-4180.

What does a concrete densifier actually do?
A densifier works inside the concrete. It penetrates the surface and reacts with the concrete to create a harder, denser surface.
That can help reduce dusting and porosity, improve durability, and support the polishing process.
What it doesn’t do is act like a topical coating. It won’t hide cracks or damaged concrete, and it doesn’t replace regular maintenance.
Ameripolish 3D HS is one of the densifiers we use and recommend as part of polished concrete systems.
Questions about polished concrete? Give us a call at 803-359-4180.

Floor finish can lose its shine faster than expected, and it’s not always because the finish itself is bad.

A few common causes are using the wrong cleaner, mixing chemicals too strong or too weak, letting grit build up, or going too long between routine maintenance and burnishing.

A good floor-care program is really about using the right products together. Revolution gives you the finish, Eclipse Neutral Cleaner handles routine cleaning, and ReBound can help maintain and enhance the appearance between refinishing cycles.

If your floors are dulling sooner than they should, give us a call at 803-359-4180 and we can help you look at the whole maintenance process.

Choosing the right floor pad can make a big difference in how well the floor cleans — and how long the finish lasts.

Red is a good choice for light cleaning and buffing.
Blue steps up to medium scrubbing and scuff removal.
Green is for deeper scrubbing and light stripping when the floor needs more attention.

The key is matching the pad to the soil level, floor finish and the job you’re trying to accomplish.

We carry Americo floor pads in a range of sizes and applications. If you’re not sure which one you need, give us a call at 803-359-4180.

Ever mop a tile floor and the grout still looks dirty?
That’s because grout is porous. Dirty water, grease and soil can settle into the grout lines over time, so routine mopping may clean the tile without fully cleaning the grout.
When buildup gets heavy, it usually takes a stronger cleaning process made specifically for tile and grout.
One product we use for that type of job is NCL Cyclone, a heavy-duty tile and grout cleaner designed for tougher soil and buildup.
Not sure what your floor needs? Give us a call at 803-359-4180.