Prime Tech Support

This iPhone arrived completely non-functional, severely damaged, and with no backup. Our technicians diagnosed a board-level failure and repaired it using advanced microsoldering techniques—saving both the device and the data.

Real repair isn’t just about swapping parts. It’s about finding the problem and fixing it at the source.

Repair it. Don’t replace it.

This RTX 4090 came into the shop after a coffee spill left behind corrosion and contamination across the PCB.

Liquid damage can quickly lead to corrosion, damaged components, and electrical failures if it's not addressed properly. In this repair, we removed the damaged components, cleaned the affected areas, replaced faulty capacitors, and restored the board using precision soldering techniques.

Not all laptop memory is the same.

This Dell laptop uses a CAMM (Compression Attached Memory Module) instead of the traditional SO-DIMM RAM found in most systems. Its flat, board-mounted design helps support thinner devices while offering high-speed performance.

We also take a look inside the laptop, highlighting its dual-fan cooling system, 83Wh battery, M.2 SSD slots with thermal plates, and built-in SIM card support.

Have you seen CAMM memory before, or is this your first time? Let us know in the comments!



💬 First Comment

One small RGB connection almost caused a serious problem.

When building a PC, even a simple cable connected to the wrong header can lead to unexpected issues—or even damage your hardware.

Before powering on your system, take a few extra seconds to double-check every cable and header. A careful inspection now can save you from expensive repairs later.

💬 Have you ever caught a wiring mistake before turning on your PC? Tell us in the comments!

At first glance, it doesn't look good.

A severe impact damaged the PCB near the PCIe connector, leaving visible structural damage on the board.

But before calling it a total loss, every component needs to be inspected and tested.

Can this GPU be saved?

Not every failed hard drive is beyond saving.

In this recovery, we're using the PC-3000 Portable PRO, an advanced diagnostic platform designed to access drives that standard operating systems can no longer recognize.

You'll also notice a CPU cooler sitting on the hard drive. During long recovery sessions, additional cooling helps maintain stable operating temperatures while data is read sector by sector.

Recovering critical data takes the right tools, the right process, and plenty of patience.

💬 Have you ever lost important files from a hard drive? Share your experience below or send us a DM if you need professional data recovery.

If your laptop is running hot, dust buildup could be restricting airflow and reducing cooling performance.

A proper cleaning starts with a soft brush to loosen debris, followed by compressed air to safely remove it from the cooling system. This helps prevent dust from being pushed deeper into the fans and heatsinks.

Regular maintenance can improve airflow, reduce fan noise, and help extend the life of your laptop.

When was the last time you cleaned your laptop? Let us know in the comments or send us a DM if your system needs professional maintenance.

A great PC isn't just about powerful hardware—it's about creating a build where every detail works together.

For this project, we installed the ROG Thor 1200W Platinum III Hatsune Miku Edition, featuring premium performance, custom-themed modular cables, and a one-of-a-kind design.

The result? A custom PC that delivers both power and style.

A great custom PC is more than powerful hardware—it's about bringing every detail together.

This build pairs an EVGA RTX 3080 FTW3, white Corsair liquid cooling, RGB lighting, and custom sleeved cables to create a clean black-and-white aesthetic that performs as good as it looks.