AP Machinery

The job is in the backyard. Your machine is stuck in the driveway.

That’s a rough time to start measuring. 👀

The Wacker Neuson SM120 measures 41 inches wide without a bucket. For landscapers and contractors working around fences, side yards and tight access, machine width belongs in the buying conversation right alongside horsepower.

But here’s the detail people miss: the attachment has to fit, too.

Measure the narrowest opening. Account for posts, hinges and room to maneuver. Then check the width of the bucket or attachment you’re actually bringing.

Buying a bigger machine doesn’t help if you can’t get it to the work.

Tell AP Machinery what you’re doing and what you need to get through. Let’s talk about whether the SM120 fits your operation.

What’s the tightest access you’ve ever had to squeeze a job through?

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042

“It hooks up” isn’t the same as “it’s the right attachment.”

Before you buy that brush cutter, auger or grapple, check more than the mounting plate.

For hydraulic attachments, the machine’s flow and pressure need to match the attachment’s requirements. Mounting compatibility, attachment weight and the loader’s approved capacity matter too. More horsepower doesn’t replace checking the match.

That’s why shopping for a loader should start with this question:

“What do I need it to run?”

Tell us about the work. Tell us which attachments you already own. Then let’s talk about the Wacker Neuson machine that fits your operation.

AP Machinery is your authorized Wacker Neuson dealer in Midlothian, with equipment sales, rentals, parts and service support.

Operators: which attachment earns its spot on your trailer every day?

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042

Your next loader doesn’t need to be heavier just to give you more horsepower.

Put the Wacker Neuson ST27 beside the Bobcat T64-2:

ST27: 74.3 horsepower. About 7,350 pounds.
T64-2: 68 horsepower. 8,440 pounds.

That’s more horsepower with roughly 1,090 fewer pounds of machine to haul. The ST27 also lists more standard auxiliary hydraulic flow: 19.3 GPM versus 17.6 GPM.

Does that make it the right loader for every job? No. Your loads, attachments, access, and hauling setup still need to match the machine.

But it’s a good reason to look past the brand you’ve always bought.

And here’s where AP Machinery comes in.

We help you choose equipment for the work you actually do. Then we back it with parts support and on-site or in-shop service right here in Midlothian. You’re choosing a machine AND the people you’ll call when it needs attention.

Already running a Bobcat? Bring your questions. Let’s walk through the Wacker Neuson ST27 and talk about a demo.

Operators: what’s the one thing your current loader does that you would change?

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042

Used equipment does not have to mean used up.

This 2022 JCB 3TS-8T is available now at AP Machinery for $60,000.

If you need a track loader that is ready to go to work without waiting on a new order, this is the kind of machine worth a look.

Strong machine.
Ready to work.
Available now.

Used inventory like this does not usually sit around long, especially when contractors need iron fast and do not want to get stuck waiting.

If this one fits your crew, call AP Machinery and let’s talk.

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042
🌐 apmachinerytexas.com

“Tracks are always better.”

Tell that to the guy moving material across a paved yard all day. 👀

The right answer starts with the work.

Working in soft ground, loose dirt and muddy conditions? A compact track loader deserves a look. Tracks spread the machine’s weight over a larger contact area, helping it work on softer surfaces.

Loading trucks and carrying material back and forth across a firm yard? An articulated wheel loader deserves a look. That repeated loading and hauling is exactly the kind of work it’s built for.

And this isn’t just the same machine with different footwear. A track loader and an articulated wheel loader handle differently. Your loads, attachments, access and travel distances all matter.

Wacker Neuson offers both. At AP Machinery, let’s start with what your crew needs to accomplish, then talk equipment.

Operators: what are you running, and what’s the job that makes you glad you chose it? 👇

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042
apmachinerytexas.com

The repair bill is not always the expensive part.

The real cost of downtime can be:

Crew members standing around
Jobs falling behind
Deliveries getting pushed
Rental equipment at the last minute
Missed deadlines
Lost production

That is why maintenance, parts availability, service access, and dealer support matter so much more than people think.

A machine does not make you money because it looks good sitting on the lot.

It makes you money when it is working.

AP Machinery is here with parts, service, rentals, and equipment support to help keep your crew moving.

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042
🌐 apmachinerytexas.com

Don't judge a machine by its cover. Look beyond paint, price, and horsepower.

Check the inside for easy access, service, and maintenance.

Wacker Neuson's design stands out for its simplicity and efficiency.

Compare and see the difference at AP Machinery.
📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042
🌐 apmachinerytexas.com

Monday is a bad day to find out your machine is not ready.

Before the week gets rolling, check the basics:

Battery
Fluids
Tracks or tires
Hydraulic leaks
Filters
Grease points
Attachments
Warning lights

It is not fancy, but it keeps crews from standing around while the schedule catches fire.

And if something does not look right, AP Machinery can help with parts, service, rental backup, and equipment sales right here in Midlothian.

📍 861D Dividend Rd, Midlothian, TX
📞 (972) 268-0042
🌐 apmachinerytexas.com